Automatic Soap Dispenser

    Pump Soap Dispenser

       Counter Top

    Liquid Soap Dispenser
    Foam Soap Dispenser
    Soap Dispenser Manufacturer
       American Specialties, Inc.
       Better Living Products
         AVIVA Soap Dispenser
         Classic Soap Dispenser
         Curve Soap Dispenser
         Signature Soap Dispenser
         Touchless Soap Dispenser
         Ulti-Mate™ Soap Dispenser
         WAVE™ Soap Dispenser

         Bobrick Soap Dispenser

             Bobrick B-822

             Bobrick B-4112
             Bobrick B-60
             Bradley 6A00-11
             Bradley 6563
             Bradley 6515
       Kutol Products
         Clean Shape Disposable
       Palmer Fixture Company
    Soap Dispenser Parts




Bobrick B-822 ConturaSeries® lavatory-mounted soap dispenser for liquid soaps, lotions, and detergents, is designed for most appellations.  This dispenser is not designed for  alcohol-based hand sanitizers or iodine-based soaps.

The Bobrick B-822 soap dispenser dispenses commercially marketed all-purpose soaps.  The piston has arcs and radiuses on top and sides complementing other Bobrick B-822 ConturaSeries® accessories in the washroom.  The Stainless steel spout rotates 360 degrees without damaging the valve mechanism.  The cover locks to body with concealed locking mechanism that is opened only with special key.  The piston, spout and supply tube assembly is removable for top filling and maintenance.  The shank accommodates up to 4" (102mm) mounting thickness.  The Bobrick B-822 holds 34-fl oz (1.0-L).  The Bobrick B-8221 holds 20-fl oz (0.6-L).  Both models come with either a 4" or 6" spout.

  • Top-filling design for ease of maintenance and labor savings.
  • Vandal-resistant locking cover and free-turning spout.
  • Corrosion-resistant.
  • Bright-polished 4" (100mm) or 6" (150mm) spout, cover and escutcheon.
  • Impact-resistant ABS body and shank; shatter-resistant polyethylene container.
  • Capacity: 34-fl oz (1.0-L) or 20-fl oz (0.6-L).
  • Maximum mounting thickness: 4" (100mm) or 1" (25mm).
  • Patented design.

Top-fill design for ease of maintenance and labor savings • Vandal-resistant locking cover and free-turning spout • Corrosion-resistant • Bright-polished spout, cover and escutcheon • High-impact-resistant ABS body and shank • Shatter-resistant polyethylene container • Patented

Bobrick B-822 Lavatory-Mounted Soap Dispenser

Soap Dispensing Information

  • Bobrick B-822 Soap Dispenser is designed to dispense commercially marketed all-purpose hand soaps including liquid and lotion soaps, synthetic detergents, and antibacterial soaps containing PCMX and/or Triclosan.
  • Bobrick B-822 Soap Dispenser is not designed to dispense alcohol-based hand sanitizers or iodine-based surgical soaps.

Designers Note

  1. Mount through 1" (25mm) dia. hole in lavatory or countertop.
  2. Diameter of escutcheon: 2-1/16" (50mm).
  3. Maximum height from base of body to bottom of container: 14-5/8" (370mm). Allow clearance below basin for 3-1/2" (90mm) dia. container.
  4. Mount so end of spout extends over inner edge of bowl.


B-822 34-fl oz (1.0-L) 4" (100mm) 4" (100mm)
B-8221 20-fl oz (0.6-L) 4" (100mm) 1" (25mm)
B-8226 34-fl oz (1.0-L) 6" (150mm) 4" (100mm)
B-82216 20-fl oz (0.6-L) 6" (150mm) 1" (25mm)

Bobrick B-822 & B-8226Bobrick B-8221 & B-82216


Installing the Bobrick B-822

The Brobrick B-822 comes in two basic sizes.  When you are considering use a counter top dispenser, you should consider the thickness  of the counter  where the dispenser will be installed and the amount of room available under the counter for the soap container.  The Bobrick B-822 comes with a long neck able to mount in a counter that is up to 4" thick and comes with 32 oz soap container.  The larger container requires more space.  The Bobrick B-8221 is design for applications were space is and issue, however, it can only be install in a counter 1" thick or less.

The smaller container may also be good for applications of lower usage.  If your dispenser is not used often the product could be come old and clog the dispenser.  Using a smaller container could help forcing a more frequent maintenance for refills.  You also use the larger container and just not fill it to capacity.



Payment Options

Site Map  Affiliate Program
© Copyright 2009- All Rights Reserved